Top Consulting-Specifying Engineer Articles, August 2011

Most visited articles at www.csemag.com during August 2011 included getting to know the new lighting code, using geothermal systems to obtain net zero, chiller plants in humid zones, engineering smart hospitals, and MEP project profiles from the 2011 MEP Giants.

09/02/2011


August 2011’s leading Consulting-Specifying Engineer online stories include:

Know the newest lighting code - Justin Schultz and Michael Chow explain the new ANSI/ASHRAE/IESNA 90.1-2010 lighting and lighting control changes. Figure 5: Exterior lighting zones are shown. Defined zones allow for differentiation between building sites to allow more lighting in well-lit zones and less lighting in dim-lit zones. Courtesy: Dept. of Energy Building Energy Codes Program

Achieving net zero with geothermal systems - In order to meet the most stringent definition of a net zero building, a building must have net zero energy and water usage, and waste production; geothermal systems are one way to meet those Five condenser water pumps were installed with variable frequency drives for soft start and stop. Courtesy: Southland Industriesrequirements. 

Using chiller plants in humid zones - In this article, using chiller plants in humid zones is discussed; including an example of dual chiller plants achieving energy efficiency for a federal office building in Washington, D.C. 

MEP Giants Project Profiles - As part of the 2011 program, MEP Giants submitted project profiles detailing the variety of projects across the globe, with 50 of the 100 responding, there’s quite a lot to see.

Smart hospital engineering - In Consulting-Specifying Engineer August, expert engineers offered advice on engineering hospital systems intelligently, from HVAC to fire/life safety.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me