Top 5 Consulting-Specifying Engineer articles, June 16-22

Articles about LED retrofit codes and standards, NFPA 99-2012 changes, arc reduction code requirements, the 2014 Electrical and Power Study, and arc flash protection techniques were Consulting-Specifying Engineer’s five most clicked articles from last week, June 16-22. Were you out last week? Miss something. You can catch up here.

06/24/2014


1. LED retrofit codes, standards

Clients are asking lighting designers to help them save on energy costs. Replacing fluorescent, HID, or other lights with LEDs is in high demand.

2. Know the intent, changes of NFPA 99-2012

NFPA 99: Health Care Facilities Code was completely overhauled and rewritten from the 2005 edition to the 2012 edition and was changed from a “standard” to a ”code.”

3. How will you meet new code requirements for arc reduction?: Q&A Session

Arc flash incidents occur all too often and impact many lives. To address the problem in the industry, NEC 240.87 was developed to ensure arc flash safety in the electrical industry. Three industry experts weigh in through an extensive Q & A.

4. Consulting-Specifying Engineer 2014 Electrical and Power Study

According to the data in this report, more engineers are researching new electrical and power systems and the challenges of incorporating energy efficient designs continue to climb. View seven key findings and access the full 2014 Electrical and Power Study.

5. Criteria for selecting arc flash protection techniques, Part 3

A variety of arc flash mitigation systems and active arc flash resistant switchgear are available to boost protection against arc flash incident energy.

The list was developed using CFE Media's web analytics for stories viewed on csemag.com, June 16-22, for articles published within the last two months.

- Chris Vavra, content specialist, CFE Media, cvavra@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me