The Green Building Market and Impact Report 2009 is released

An annual green buildings report  highlights the impact of LEED-certified buildings.




    According to a Reuters , the second annual Green Building Market and Impact Report 2009 , researched and written by Rob Watson explores the impacts that LEED-certified buildings have already had on energy, water, waste, and employee productivity. The report also projects the impact green buildings will have over the next 20 years.

    Green building activity has sustained substantial growth during 2009, amid downturns in the construction market. According to the report, floor area registered and certified by the U.S. Green Building Council's LEED green building rating system in 2009 is estimated to grow by over 40% compared to last year's totals, for a cumulative total of over 7 billion sq ft worldwide since the standard was launched in 2000.

    The report also assesses the impact of green building outside the United States. According to Watson, non-U.S. green buildings reached nearly 800 million sq ft of registered projects in 2009, representing more than a fourth of all project square footage. Non-U.S. LEED projects could show a 30% increase in registration this year, thanks in large part to green building booms in China, India, and the Middle East. Green building is also growing quickly in Europe, notably Germany and Italy.

    Key findings include:

    • The estimate of reduced vehicle miles traveled (VMT) has grown to 780 million VMT to date vs. 400 million in 2008. By 2030, the annual gasoline savings are expected to equal current U.S. imports from the Middle East.
    • Total water savings from LEED through 2009 is estimated at 15 billion gallons, comprising 0.5% of annual non-residential water use. By 2030, LEED results in nearly 1.3 trillion gallons of saved water, equivalent to 30% of current annual non-residential water use.
    • Annual carbon dioxide savings from LEED buildings is approximately 2.9 million tons from energy efficiency and renewables, a figure that is expected to grow to 130 million tons per year by 2020 and almost 320 million tons annually by 2030.
    • Based on average materials costs, green building materials represented approximately $7 billion in cumulative spending through 2009, which is expected to reach a cumulative $230 billion by 2030. Moreover, the embodied energy in buildings that are renovated instead of demolished is expected to save as much energy in 2030 as the U.S. imports this year from Saudi Arabia. In addition, an average of over 60% of construction and demolition waste was diverted from LEED projects, totaling 25 million tons to date.
    • An average of at least 580,000 employees are currently enjoying improved indoor environments in LEED buildings at present, and the "green building workforce" is expected to approach 29 million by 2020 and almost 64 million by 2030. The productivity benefits from LEED buildings to date range from $230 to $450 million.

    For additional reading on green buildings, their impact on the construction market, and the difference between building green and performing green, read the MEP Roundtable debate from the October issue of Consulting-Specifying Engineer, " Green design vs. green performance ."

    No comments
    Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
    Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
    The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
    Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
    Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
    HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
    Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
    Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
    Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
    As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
    Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
    IEEE power industry experts bring their combined experience in the electrical power industry...
    Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.