Technologies inside: Higher pump efficiency, consolidated logic

Eaton M-Max VFD provided QuantumFlo with a cost-effective, more energy-efficient solution than prior drives used. The more accurate Eaton M-Max drive with IP21 conduit kit allowed QuantumFlo to meet energy and functionality needs, while eliminating the PLC and control panel for logic.

04/15/2013



The Eaton M-Max drive provides pump control and reduces equipment requirements (and space) for the QuantumFlo Atom booster pump system. Courtesy: EatonEaton M-Max VFD provided QuantumFlo with a cost-effective, more energy-efficient solution than prior drives used, the companies said. The more accurate Eaton M-Max drive with IP21 conduit kit allowed QuantumFlo to meet energy and functionality needs, while eliminating the PLC and control panel for logic.

QuantumFlo used its variable speed pump expertise to develop a “pump in a box” solution, the  QuantumFlo Atom Simplex Light Commercial/Residential pressure booster, a fully contained, fully assembled solution with integrated motor, pump, bladder tank, and a VFD.

Eaton’s M-Max variable frequency drive was used with an IP21 conduit kit to contain all the wiring.

- Robert Fenton is product line manager at Eaton. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, Plant Engineering, and Consulting-Specifying Engineer, mhoske@cfemedia.com.

www.eaton.com

See related article and application image: More efficient pumps use VFDs, consolidate logic

This article is part of the April 2013 CFE Media supplement, Industrial Energy Management. See other articles linked below.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me