Strong 3Q97 for Instruments Despite Turmoil in Other Markets

While investors and economists were shaken by last October's market plunge and bounceback, and by Asia's ongoing economic struggles, U.S. Commerce Department data show that new orders for the aggregated "Measuring and Controlling Instruments" (SIC 382) group grew consistently stronger last year following a weak late 1996 and early 1997.

02/01/1998


While investors and economists were shaken by last October's market plunge and bounceback, and by Asia's ongoing economic struggles, U.S. Commerce Department data show that new orders for the aggregated "Measuring and Controlling Instruments" (SIC 382) group grew consistently stronger last year following a weak late 1996 and early 1997.

Preliminary numbers for 3Q97 show a 12.2% increase in new orders for firms in the SIC 382 category from the same period in 1996. The dollar value of shipments also improved during 3Q97. They were 10.4% higher than during the same months of 1996. This was the strongest quarter-over-quarter annual growth trend recorded for the industry in almost three years.

The uptick in new orders in recent months should ensure that final numbers for 1997 will be good. Cahner Economics (Newton, Mass.) estimates that shipments grew by approximately 7.3% last year, much better than 1996's 2.5% increase, and well ahead of inflation. Demand should ease some during 1998 as business investment growth rates fall back from their exceptional rates of the past several years. Shipments should gain about 5% this year, about twice the rate of general inflation.

During 3Q97, overall business investment—the sum of the equipment and structures categories—expanded at an 18.7% annualized rate, even stronger than the exceptional 14.6% second quarter growth rate and much better than the 4.1% gain recorded during the first quarter of 1997.

Investment in new and renovated buildings—everything from manufacturing plants and warehouses to office buildings and shopping malls—increased at a 10.1% annualized rate during 3Q97, following an absolute decline in spending for structures during the first half of 1997. Business spending for new equipment grew at a much stronger 22.1% annualized rate for the third quarter, following a 23.0% gain during the previous three-month-period.

CONTROL ENGINEERING DATABASE UPDATE OF PRODUCTION TRENDS for 3Q97

1996(% change from prior year) 1997 1998 (projected)
Editor's note: All data are industrial production indexes, except those marked with a "*," which are factory shipments.
Sources: Federal Reserve Board and U.S. Commerce Department.
Forecasts: Cahners Economics, Newton, Mass.
END MARKETS
Chemicals2.73.03.3
Machinery0.14.71.5
Petroleum1.33.02.5
Paper-0.44.73.6
Motor vehicles3.81.00.9
Steel3.44.52.7
Plastics & rubber3.43.12.2
Aircraft9.821.94.1
Fabricated metals3.31.91.4
PRODUCTS
Control instruments*3.410.47.7
Computers42.433.024.6
Electronic components18.329.120.5
Communications equipment1.57.73.9
Metalworking machinery-1.34.21.9





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me