Standby generators

Generac Power Systems’ 350 and 400 kW gaseous-fueled standby generators are available as a single unit or configured in parallel up to 6 MW and designed as a natural gas alternative to diesel standby power systems.

05/05/2014


Generac Power Systems’ 350 and 400 kW gaseous-fueled standby generators are available as a single unit or configured in parallel up to 6 MW and designed as a natural gas alternative to diesel standby power systems. Courtesy: GeneracGenerac Power Systems’ 350 and 400 kW gaseous-fueled standby generators are available as a single unit or configured in parallel up to 6 MW. They are designed as a natural gas alternative to diesel standby power systems. A Generac 21.9L V12 turbocharged after-cooled engine powers both units. Both generators are factory EPA certified for stationary emergency power, and SCAQMD (California’s South Coast Air Quality Management District) certified. The generators are listed to UL2200 and certified to CSA C22.2. They are available in open-set, weather-protected, and Level1/Level 2 sound attenuated enclosures. 

Generac Power Systems 

www.generac.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.