Smart Grid standards for interoperability, interconnection, integration

Joining disparate power, IT, and communications systems in developing the Smart Grid.

03/21/2014


Dick DeBlasio, Chair, IEEE Standards Coordinating Committee 21Standards are an important consideration in the work of building engineers, but their role is increasing with the globally intensifying implementation of the Smart Grid and the revolutionary changes that are being brought about to way that buildings interact with electricity.

There is an array of standards that helps enable interoperability, interconnection and integration of disparate systems as power, IT, and communications are interweaved in the developing Smart Grid. Fortunately, for the sanity of building engineers, there is order to the ways that the various standards produced by different bodies interplay.

For example, say a roof-mounted solar panel is being installed and connected to the grid through an inverter, there are a host of standards that power engineers can look to for guidance, such as Article 690 of NFPA 70: National Electrical Code (NEC) for minimizing electrical hazards in installation and operation, UL 1741 for additional fire and safety considerations with regard to distributed generators, IEEE 1547 “Standard for Interconnecting Distributed Resources with Electric Power Systems” for the basis of the interconnection of the photovoltaic device itself to the power grid, and IEEE 1547.1 “Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems” for commissioning tests.

Systems-level standards are an area of focus for IEEE with regard to the Smart Grid. The IEEE 1547 family of standards, for example, since the base standard’s original publication in 2003, has been steadily updated to reflect evolution in the UL 1741. Work is stirring, in fact, on a new full revision of IEEE 1547, to be completed by 2018. In considering the scope and intentions of a full revision of IEEE 1574, a wide variety of stakeholders are looking at the emerging technologies and applications—microgrids, islanding, inverter communications, ride-through frequencies/voltages, higher renewable penetrations, and synchrophasors, among them—that should be addressed.

IEEE 2030 “Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and Loads” takes a similar system-of-systems approach.

More than 400 professionals from across the global communications, IT, and power industries collaborated in developing IEEE 2030, and, when it was released in 2011, it established the world’s first interface-by-interface guide to interoperability across the Smart Grid.  IEEE 2030 is a technology-agnostic roadmap to the standards and functional interfaces for securely integrating EPS with communications and IT and facilitating data exchange across the Smart Grid.

The Smart Grid is bringing definitive change to the ways that buildings relate with electricity. Whereas most buildings have historically been only consumers of electricity, more and more buildings will also serve as points of power generation in the Smart Grid. And whereas there has been no way and little need to determine when and how much buildings will need at various times of the day/week/month, more precisely understanding and forecasting power demand from and within a building is a frontier of innovation in the Smart Grid.

Standards development driven by the emerging, real-world needs of building engineers will help ensure this transformation is achieved as simply, cost-effectively and efficiently as possible.


In addition to his role as chair of IEEE SCC21 Standards Coordinating Committee on Fuel Cells, Photovoltaics, Dispersed Generation, and Energy Storage, which sponsors and leads the family of standards for IEEE 1547 and IEEE 2030, Dick DeBlasio is a member of the IEEE Standards Board and past member of the IEEE Standards Association Board of Governors and chief engineer with the National Renewable Energy Laboratory.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.