SFPE names 2012 president

The Society of Fire Protection Engineers (SFPE) has named James A. Milke, a professor and department chair for Fire Protection Engineer at the University of Maryland, as its president for 2012.

01/11/2012


The Society of Fire Protection Engineers (SFPE) named James A. Milke, a professor and department chair for Fire Protection Engineer at the University of Maryland, President for 2012. Courtesy: SFPEProfessor James A. Milke takes office as president of the Society of Fire Protection Engineers (SFPE) for 2012. Milke is a Professor and the Chair of the Department of Fire Protection Engineering at the University of Maryland.

Milke has served on the Society’s Board of Directors since 2004 and is an SFPE Fellow. SFPE Fellows represent a distinguished group of members who have attained significant stature and accomplishment in engineering. In 2009 he received the SFPE John L. Bryan Mentor Award and the Harold E. Nelson Award in 2002.

In 1981 Milke became a faculty member at the University of Maryland Department of Fire Protection Engineering and was promoted to Department Head in 2011. Over this time he has co-authored two books on the design of smoke management systems and has authored chapters in the SFPE Handbook of Fire Protection Engineering in subjects related to smoke management and the fire resistance of structural steel.

Milke holds a Ph.D. in Aerospace Engineering, M.S. degree in Mechanical Engineering and B.S. degree in Fire Protection Engineering from the University of Maryland. In addition, he has a B.S. degree in Physics from Ursinus College. He is a licensed Professional Engineer in the State of Delaware.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me