September 30 Southland Industries update: Mechanical room equipment, cooling towers passivated, chilled water system insulation

Roughing in systems on Levels 1 to 4, connecting equipment in main mechanical rooms, North and West clinics near completion, cooling towers being passivated, chilled water system getting insulation.

09/30/2013


As of Sept. 30, 2013:

  • Currently roughing in systems on Levels 1 to 4 in the hospital and are connecting equipment in the two main mechanical rooms of the hospital.
  • The North and West clinics are nearing rough in completion and drywall will begin shortly.
  • The cooling towers are being passivated in the CUP and the chilled water system is getting final insulation.

Figure 1: Bio safety lab bag in bag out filtration system. Courtesy: Gary Lovewell, Southland IndustriesFigure 2: View of the hospital from the North East. Courtesy: Gary Lovewell, Southland Industries



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me