Report helps build the case for energy code compliance

IMT Report shows that every dollar spent yields $6 in energy savings and an additional $810 Million Funding is Needed to Achieve 90% Compliance with Building Energy Codes.

09/17/2010


The following is a report from the Institute for Market Transformation, Strong building energy codes are one of the most fundamental, affordable and effective mechanisms for increasing the long-term energy efficiency of the nation’s buildings. Economic analysis indicates that every dollar spent on energy code compliance and enforcement initiatives yields $6 dollars in energy savings. This ratio includes the incremental costs to the private sector of constructing to code. Nevertheless, throughout most of the United States, building code development, implementation, training and enforcement have long been severely underfunded, with energy codes the most severely underfunded. As a result, many new and renovated homes and buildings do not comply with codes and consume far more energy and money to operate than they should.

In response to the Recovery Act (ARRA), every state has committed to achieve 90% energy code compliance. There is abundant evidence that compliance ratEes in most jurisdictions are far below 90%.2 An analysis by a task force of  experts revealed an annual spending need of $810 million for energy code training, outreach, implementation, and enforcement efforts. The task force estimates this necessary funding level, which includes the current local, state, and federal effort and spending on code compliance and enforcement, will increase local and state capacities and expertise to the level required to achieve 90% compliance rates.

WHAT ARE ENERGY CODES?

Building energy codes are minimum local and state energy efficiency requirements for newly constructed or renovated buildings. Along with other building and safety codes, energy codes are intended to ensure sound design and construction practices to conserve energy use. Typically, permitted construction projects must demonstrate compliance with energy and other codes through a plan review and several site inspections during the construction process.

WHY ENERGY CODES?

To reach our economic, climate and energy independence goals, it is critical that our built environment become more efficient. Building energy codes are the most basic and cost-effective tools to address the energy efficiency of buildings. Funding the  implementation and enforcement of energy codes to reach 90% compliance will help maximize the energy efficiency of our building stock, save Americans billions of dollars annually in energy costs, and reduce the need for costly infrastructure to meet growing peak energy demands.

CODE COMPLIANCE

Achieving code compliance is essential to effective building codes. Energy codes can deliver their potential energy savings only when projects actually comply with the code, yet statewide reports indicate significant and widespread lack of compliance. A dramatic increase in resources for compliance initiatives at all levels of government and increased enforcement at the local level are necessary to achieve high compliance rates.

RAMP UP TO $10 BILLION IN ANNUAL ENERGY SAVINGS

Building operations consumed $406 billion worth of energy in 2009 – 38% of total U.S. energy spending. Buildings that comply with energy codes are more efficient and use less energy across their lifetimes of 30 to 50 years or more. The task force economic model predicts that the additional spending3 needed to achieve 90% compliance would yield average annual energy savings ramping up to $2.7 billion in 2020 and over $10.2 billion in 2040 and each year thereafter. Including all public and private sector costs associated with code compliance, the energy savings produce a benefit-cost ratio of 6:1:4

FUNDING NEED

The task force analysis identified a total funding need of $810 million annually for the following activities:

  • Plan Review and Inspection - $660 Million
    • Currently, most jurisdictions lack the resources to adequately conduct on-site inspections, plan reviews, and otherwise assure code compliance. This level of funding would support an appropriate number of code officials and support staff for the amount of construction needing to be reviewed, permitted, inspected and approved for occupancy. The analysis identified a best-practice level of enforcement (exemplified by Austin, Texas) and calculated the cost to replicate this enforcement nationally using 8-year average construction data from the US Census Bureau, McGraw Hill, and the Bureau of Labor Statistics.
  • Implementation and Training - $125 Million
    • This funding would support measures targeted at improved energy code implementation, including training of building code inspectors, builders, subcontractors, and design professionals; outreach to stakeholders; distribution of code books and compliance manuals; compliance evaluation; and development of alternative/pilot compliance methodologies. Costs were extrapolated from best practices in multiple jurisdictions.
  • Support at the National Level - $25 Million
    • In addition to the funding required at the state and local level, there are many code support activities that could be most effectively and efficiently completed by DOE and other national-level bodies. This scale of funding would support code adoption and code development assistance; development of training tools and manuals; and a public awareness campaign regarding the importance and benefits of building energy code compliance.

 

State and local governments are typically responsible for code adoption, compliance, enforcement and training. Currently, most funding for energy code enforcement comes from permit fees collected by local or state building departments. Training costs are often borne at the state level and overwhelmingly funded by U.S. Department of Energy grants. Energy codes are usually severely underfunded and in some cases virtually ignored. There is a funding gap between current spending and the $810 million per year that is needed. The size of the gap is unknown – and additional research to better quantify the funding gap should be a high priority. Our best estimate is that the additional resources needed are greater than $610 million per year.

With state and local governments facing the deepest fiscal crisis since the Great Depression and budget cuts across the board, they are not in the position to bridge this funding gap. The three best hopes for meeting this need are:

(1)  Increased permit fees and/or improved collection

(2)  System benefit charges, integrated resource planning and other ratepayer funds

(3)  The Federal Government

For more information about Codes and Standards or Energy Efficient Green Buildings, visit the following channels on the CSE website:



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.