Renovation, expansion top hospital construction projects

2011 Hospital Building Survey shows renovation and expansion projects geared towards renovation, expansion, IT advancement, and green construction on the rise.

03/03/2011


America’s hospitals and health systems are focusing more on renovation or expansion than new construction, according to a new survey conducted by Health Facilities Management magazine and the American Society for Healthcare Engineering (ASHE). In fact, renovation or expansion accounted for 73 percent of construction projects at hospitals responding to the survey. The findings show that hospitals have been working to update or replace their infrastructure to better serve patients and help transition to greater use of information technology (IT). In addition, hospitals are focusing on being environmental stewards through greater use of “green” construction.

Overall, slightly more than one in four respondents (26.1 percent) reported that their organizations have building projects currently under construction. About 15 percent of this total involved new construction, 11.6 percent involved replacement facilities and the remainder covered expansion and renovation. In this latter category, many of the additions or modernization projects were for emergency departments, imaging, surgery areas or cancer centers.

“There’s a lot of ambiguity out there,” says George A. “Skip” Smith, CHFM, SASHE, 2011 ASHE president and interim vice president of supply chain/clinical engineering at Catholic Health Initiatives in Hilliard, Ohio. “As we look towards the future, everybody’s trying to figure it out, but nobody knows how it will all play out.”

While the construction increases aren’t dramatic, experts say there’s a clear shift in priorities that characterized previous construction trends to more emphasis on IT and other infrastructure improvements. More than one out of four hospitals were building service systems to accommodate the needs of electronic health records. A third of the 598 responding hospitals reported that they were replacing or upgrading their air handlers or ventilation systems, and one in five was upgrading a data center or planning to.

Survey data confirmed this trend and illustrated the continuing move by hospitals to add features that satisfy patients and families, while providing high quality care. Wireless technologies, in particular, are getting attention. Individual room temperature controls and educational systems each are being incorporated into about a third or more of new rooms.

Elsewhere, hospitals and health systems are focusing on making their building projects more environmentally friendly. More than two out of three respondents said they are specifying so-called “green” materials in most or all of their construction projects. About 60 percent of respondents also said their organization evaluates the cost/benefit of green construction methods for building projects.

The gradual improvement in the hospital construction market comes after a steep downturn that accompanied the nation’s deep recession in 2009, which was only a year removed from health care’s high-water mark in construction in 2008. Hospitals able to pursue construction and renovation projects are cautious in light of a changing economic and health care landscape.

- Edited by Gust Gianos, Consulting-Specifying Engineer, www.csemag.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.