SEARCH Archives
Loading
Sponsored by:

Reader forum

Cooking oil controversyI am writing regarding the ReaderForum submission, "Consider the codes" (PE, January 2001, p 7).In the part about using cooking oil to stop evaporation of water in traps, the letter's author makes a fundamental logic error in interpreting the plumbing code. I do not have a copy of that code so I am assuming that he quoted all relevant sections accurately in making his de...

Staff

01/01/1970


Cooking oil controversy

I am writing regarding the Reader Forum submission, "Consider the codes" ( PE , January 2001, p 7).

In the part about using cooking oil to stop evaporation of water in traps, the letter's author makes a fundamental logic error in interpreting the plumbing code. I do not have a copy of that code so I am assuming that he quoted all relevant sections accurately in making his determination that using cooking oil in a drainage trap is a code violation.

While it is obvious that cooking oil is insoluble, that does not automatically disqualify its use. As stated in Sec. 302.1: "...oil...or other insoluble material capable of obstructing, damaging, or overloading the building drainage or sewer system, or capable of interfering with the normal operation of the sewage treatment process, shall not be deposited, by any means, into the system."

I fail to see how cooking oil meets this second qualification. It will not cause any problems with plumbing, and every sewage treatment plant uses skimmers to remove oils as a normal part of the process. Any small amount of oil that might be released to a treatment plant would be dwarfed by the amount of oils and grease released every time someone washes his or her pots and pans.

I have also seen ads for flushless urinals in which an insoluble liquid with a deodorant is used to float on top of water soluble liquids to keep them from evaporating and fouling the room air. I doubt that these could be offered for sale if they were in violation of the plumbing code. — Robert Klein, Electrical/Misc. Engineer, Vulcan, Inc.

By whose authority?

In regard to your Editorial, "By whose authority?" ( PE , November 2000, p 14), the new concept may have its place, but not in my plant.

The people with authority today usually don't have the qualifications or experience to make a yes-or-no decision about my work responsibilities.

That's why my plant's operations are declining from the infrastructure to the production goals.

I have been the key person making these decisions for 15 yr, along with other engineers in their respective areas. Now for the last 5 yr, this situation has changed along with the plant's profitability.

We must return to qualified and experienced people who have responsibility and authority to carry out the projects that must be done in order to bring business back to the way it used to be. — Name withheld by request

Upcoming events

Facility Forum , the "Total Facility Management Event," is the most comprehensive conference and exhibition designed exclusively for the diverse needs of facility professionals. April 22%%MDASSML%%25, 2001, Dallas Convention Center, Dallas, TX. For information, visit facilityforum.com or call 800-524-0337 ext. 225 or e-mail ghaile@groupc.com.

Powder & Bulk Solids Conference/Exposition: The global center for dry processing and bulk material handling. Conference: May 7-11, 2001; exhibition: May 8-10, 2001; Donald E. Stephens Convention Center, Rosemont, IL. The show is free to all who register by April 13. Conference fees vary. For information, visit powdershow.reedexpo.com or call 800-354-4003.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating lighting, HVAC systems, Energy codes and lighting, BIM and fire protection engineering
Engineering hospital electrical systems, Boilers and boiler systems, Building envelope best practices
Hospital indoor air quality, ASHRAE 90.1 update, Specifying piping materials, Integrated project delivery
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Estimating data center PUE, Design tips for cost savings, Networked controls, NFPA 70E
Preventing arc flash, Backup power fuel choices, power for high-tech facilities
Using BIM in electrical power design; Closed-transition transfer; Medium-voltage distribution; Diesel emission regulations; Increasing emergency power capacity
About Us | Contact Us | Advertise | Subscribe to Magazine | Site Map | Privacy Policy
Home | Channels | New Products | Media Library | Connect | Industry News | Events and Awards | Newsletters | Blogs | Magazine
Control Engineering | Plant Engineering | Consulting-Specifying Engineer
All content copyright © 2010-2013 CFE Media. All rights reserved.