Panel Ponders PLC Future at Joint ISA Sections Meeting

Is the PLC dead or alive? This was the main question debated by members of ISA's Chicago and Will-DuPage county sections during a Jan. 13 technical dinner meeting and panel discussion. The panel included representatives of PLC, DCS, and PC-based control manufacturers, such as Fisher-Rosemount (Austin, Tex.

02/01/1998


Is the PLC dead or alive? This was the main question debated by members of ISA's Chicago and Will-DuPage county sections during a Jan. 13 technical dinner meeting and panel discussion. The panel included representatives of PLC, DCS, and PC-based control manufacturers, such as Fisher-Rosemount (Austin, Tex.), Elsag Bailey Process Automation (Wickliffe, O.), GE Fanuc (Charlottesville, Va.), Steeplechase Software (Ann Arbor, Mich.), Square D (Raleigh, N.C.), Moore Products, Inc. (Spring House, Pa.), and Intellution (Wizdom, Naperville, Ill.).

Some participants thought very few PLCs will be sold five years from now. They reasoned that PCs' increasing penetration into almost every area of modern life will make them so common that control engineers will use them without hesitation.

However, other panelists added there are still many hard-wired relay control installations running today, even though PLCs have been accepted in manufacturing for years. Logically, they concluded that PLCs will also be around for many years.

The panelists generally agreed their markets and technology are being driven by users' needs for easily engineered, inexpensive systems that have smaller components, as well as users' desires for open systems. For instance, current technology often makes adding third-party components and software to control structures easier for users. However, this is both a threat and an opportunity for control system vendors because they must rely on buyers to understand the risk involved with mixing different vendors' components in the same control system.

With the proliferation of high-speed networks in factories, PCs that can handle large amounts of data and enable excellent communications will become even more necessary. The panelists added that PLC manufacturers have responded by adding PC coprocessors to handle these tasks. Meanwhile, PC software vendors have been working to take PC-based control downward to the device/logic level and upward to the DCS level. They're also constantly adding drivers to make it easier for users to add desired I/O devices to the system.

In conclusion, the panelists also agreed on implementation of IEC-1131. All have implemented at least part of the standard, and some are working to expand on it to offer users even better usability and flexibility. They projected a continued blurring of traditional distinctions among PLC, PC, and DCS, and added the result will be improved options for the control engineer.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me