November 1 Southland Industries update: Roughing-in Levels 2 and 5; temporary air conditioning; parking garages

Roughing-in systems on Levels 2 and 5; North and West Clinics being prepared for temporary air conditioning; CUP stream plant being finalized; three parking garages underway.

11/15/2013


As of Nov. 1, 2013:

  • Currently roughing in systems on Levels 2 and 5 in the hospital.
  • The North and West Clinics are being prepared for temporary air conditioning with the house air handling units. The South Clinic rough-in is underway on Level 1 with all levels of structure and interstitial floors complete.
  • The CUP stream plant is being finalized with the majority of the heat exchangers and specialty equipment bring set and connected over the next couple of months.
  • All three parking garages are underway.

Figure 1: Aerial view from the Northwest. Courtesy: Aero Photo, Kristi KoenigFigure 2: CUP steam boiler trench. Courtesy: Aero Photo, Kristi Koenig



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Pump technology design: Selecting pumps and pipes; Class A office buildings; NFPA 101-2015; ASHRAE 90.1 updates; Motors, drives, and HVAC efficiency
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me