Novartis: Offsite MEP prefabrication

A 700,000-sq-ft research facility is being built for Novartis in Cambridge, Mass.

12/23/2013


While slabs are being poured and steel is being fireproofed on Building 608 (one of the two lab towers), MEP prefabrication is well underway in the offsite facility. Courtesy: Cannon DesignWork for Novartis has begun implementing an innovative construction technique – off site prefabrication combined with Building Information Modeling (BIM). While the steel is still going up, MEP systems are being assembled as coordinated modules at an offsite construction facility, located a short distance from the site of the new 700,000-sq-ft high-end research facility in Cambridge, Mass. The modules themselves are assembled at the offsite facility, ranging from 10 to 60 ft long. Once completed, they will contain ductwork, HVAC piping systems, plumbing piping systems, air terminal units, and conduit. Systems are able to be pressure tested and fully insulated before even leaving the facility.

The multi-trade prefabrication effort has allowed for cost savings seen by the client, compressed construction schedules, and improved safety. Large scale buildings with similar floor plans and programs create an ideal opportunity for prefabricated modules. Skanska Construction has recognized these benefits, and is implementing MEP prefabrication in construction projects all over the world. Prefabrication techniques similar to the ones being used for Novartis are becoming more and more prominent in the industry, paving the way for the future of construction.

While slabs are being poured and steel is being fireproofed on Building 608 (one of the two lab towers), MEP prefabrication is well underway in the offsite facility. Courtesy: Cannon DesignThis portion of the well-organized facility is designated for riser fabrication. Courtesy: Cannon DesignPrefabricated exhaust riser arrives on site. Shown above is the riser being raised by crane and lowered into the shaft. Courtesy: Cannon Design



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.