NEBB appoints director of technical services

Tom Meyer, a veteran with more than 25 years of hydronics experience, will be responsible for the quality of NEBB's technical programs as its director.

02/28/2012


Tom Meyer, a veteran with more than 25 years of hydronics experience, will be responsible for the quality of NEBB's technical programs as Director. Courtesy: NEBBThe National Environmental Balancing Bureau (NEBB) has appointed Tom Meyer as the Director of Technical Services. As the association’s technical expert, Meyer will be responsible for the quality of NEBB’s technical programs, including publications, training, education, advising and testing content.

Meyer has more than 25 years of experience in hydronics. Prior to joining NEBB, he was the Director of Government and Professional Affairs for the ESCO Group. He is a past president of Precision Hydronics Corporation, an international hydronics design, consulting and training firm. He was also the founding Executive Director of the Green Mechanical Council and was formerly the President of Praxis Green Inc.

Tom co-authored the new Residential Building Code for Kuwait, which was passed into law this year, and he taught the new Code to Kuwait government engineers at the University of Kuwait. He also was an advisor and project coordinator for the Office of the Architect of the Capitol in Washington, D.C.

Meyer is a member of the High Performance Building Council, High Performance Building Congressional Caucus Coalition, International Association of Plumbing and Mechanical Officials (IAPMO) Green Technical Committee, and is HVAC Chair of the IAPMO Green Technical Committee. 

Tom graduated from the Ohio State University. He has the following credentials: 

  • DES - Designer of Engineered Systems (State of Wisconsin)  
  • CSME - Certified Subject Matter Expert - Hydronics (HVAC Excellence)
  • GGP - Green Globes Professional (GBI)
  • CBCP - Certified Building Commissioning Professional (Association of Energy Engineers)
  • QCxP - Qualified Commissioning Professional (University of Wisconsin)
  • EBCP - Existing Building Commissioning Professional (Association of Energy Engineers)

Meyer is also a member of the following ASHRAE Committees:

  • SSPC 134 – Graphic Symbols for HVAC and Refrigerating Systems Standard – Chair
  • TC07.04 – Energy Analysis for Sustainable Buildings - Chair
  • STDS-SGPC 0 – The Commissioning Process Standard – Vice Chair
  • MTG.BPM – Building Performance Metrics – Member
  • SSPC 90.2 – Energy-Efficient Design of Low-Rise Residential Building Standard - Member
  • TC06.06 – Radiant Heating and Cooling - Corresponding Member
  • Best Practices for Commercial Buildings – Energy Subcommittee

 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.