National Lighting Bureau reports third-quarter 2010 Lighting Systems Index improvements

Third-quarter 2010 NEMA Lighting Systems Index (LSI) performance bested the second quarter’s by 0.9% and was 5.6% ahead of third-quarter 2009’s.


Third-quarter 2010 NEMA Lighting Systems Index (LSI) performance bested the second quarter’s by 0.9% and was 5.6% ahead of third-quarter 2009’s, the National Lighting Bureau (NLB) reports.

Established in 1998, NEMA’s LSI is a composite measure of lamps, luminaires, ballasts, emergency lighting, exit signs, and other lighting products shipped nationally and internationally from the United States by the 450 companies that comprise the National Electrical Manufacturers Association (NEMA). Adjusted for the season and inflation, the Index uses 2002 data for its 100-point benchmark.

The new commercial/industrial-construction markets are the principal drivers of lighting-equipment sales. Both are weak and will remain so through most of 2011.

NLB Executive Director John Bachner commented that existing lighting-system upgrades will probably account for most commercial and industrial equipment sales in the near term. Indeed, while the third-quarter LSI performance improvement can be attributed to growth scattered throughout the product groups tracked by the Index, fluorescent-ballast shipments registered the most appreciable increase, a development Bachner attributed to the July 1, 2010 phase-out of magnetic ballasts used for T12 fluorescent systems.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me