Measurement, Analysis, and Control System

Spring House, Pa.— MPACS (measurement, process analysis, and control system) advances the technology of dimensional measurement systems by blending advanced control software, standardized hardware, and open system connectivity. Modular in design, MPACS uses any PC (commercial, industrial, customer standard, etc.

03/01/1998


Spring House, Pa. — MPACS (measurement, process analysis, and control system) advances the technology of dimensional measurement systems by blending advanced control software, standardized hardware, and open system connectivity. Modular in design, MPACS uses any PC (commercial, industrial, customer standard, etc.) and Dynascan 4000 intelligent remote I/O system. The split-architecture system increases overall performance and permits third-party applications to be run on the PC without degrading measurement performance, regardless of software loaded on the PC.

Moore Measurement Systems





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me