Machine safety: Executives balance risks, profits

Industrial executives are engaged more than ever in operational risk oversight. This certainly includes machine safety.

05/16/2013


Given our current economic environment, and particularly in industry, it’s probably not a big surprise that executives are engaged more than ever in operational risk oversight. Quickly reacting to shifts in market demands, adverse events and the ever changing governmental regulatory and compliance requirements is a must. Is machine safety in their cross hairs?

 

You bet! I recently read a recent study completed by the Aberdeen Group titled: Operational Risk Management: Getting Ahead of the Risk Curve, November 2012. In this study Aberdeen evaluated 119 executives from various companies and found that “best in class” companies established a framework to facilitate sustainable programs throughout the organization to identify risks, implement corrective procedures and preventive procedures.

 

So, how does this impact machine safety? Well, it seems that of the four major pressures driving their focus, there were eight influences impacting those financial risks. And, that there was no one single influence that was the most dominant. These eight influences are:

  • Failure of Critical Assets
  • Non-Compliance (OSHA, FDA, NERC, etc.)
  • Environmental Impact (spills, leaks, etc.)
  • Financial Risks
  • Logistics Risks
  • Supplier Quality
  • Environmental Health and Safety (EH&S)
  • Supplier Risks (re-evaluate portfolio of contract suppliers)

 

As an industry expert in machine safety I know that the above influences highlighted in yellow are heavily impacted by how effective a companies’ safety culture is within the business. For example, unplanned machine downtime and OEE (Overall Equipment Effectiveness) are two factors of effective machine safety and they directly contribute to “Failure of Critical Assets.” Both “Non-Compliance” to regulations and standards and “Environmental Impacts” of spills or leaks are major expenses of in-effective machine safety which go directly to the bottom line. And, “EH&S” issues in employee morale translate directly to productivity performance which also impacts the bottom line.

 

In my opinion, no wonder executives are balancing for profits focused at Operational Risk Management including machine safety.

 

J.B. Titus, CFSE

Has this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

 

Related articles:

Machine Safety: Managing operational risk

Aberdeen Group - “Operational Risk Management”, November 2012

The term Operational Risk Management (ORM) is defined as …..Wikipedia

 

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me