Machine safety: Does effective grounding include ancillary hand rails, fences, and more?

How inclusive is effective grounding for machine safety? Should safe machine grounding consider hand rails, walkways, and protective fencing?

04/29/2013


How all encompassing is effective grounding for machine safety? Does this requirement really include things like hand rails, walkways and protective fencing?

 

The discussion regarding effective grounding is really broad and sometimes vague in my opinion. Certainly it’s intended to protect people from being electrically shocked and to guard against any false or unintended operation or movement of a machine. Some standards will have pages of requirements whereas other standards might have one paragraph “referencing” a manufacturer’s specifications. Most of these standards benefit by some level of interpretation by a knowledgeable person for the most effective grounding applications. Let’s look at one general description/requirement from NFPA 79; 2012:

 

8.2.1.2 Equipment Grounding. The machine and all exposed, non-current-carrying conductive parts, material, and equipment likely to be energized shall be effectively grounded. Where electrical devices are mounted on metal mounting panels that are located within nonmetallic enclosures, the metal mounting panels shall be effectively grounded. Where specified by the manufacturer, components and subassemblies shall be bonded to the equipment grounding (protective bonding) circuit in accordance with the manufacturer’s instructions.

 

The first sentence of this standard can easily be interpreted as though provisions like hand rails, walkways, and protective fencing probably don’t need grounding or bonding provisions.

 

However, if the walkway or hand rail connects a machine to another machine which also has an electrical control system and devices, industry experts have often recommended that these metallic non-current-carrying conductive parts be effectively grounded.

 

Does anybody know why?

 

J.B. Titus, CFSE

Has this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

 

Related articles:

NFPA 79; 2012 – Electrical Standard for Industrial Machinery

ANSI B11.19 – 2012 Performance Criteria for Safeguarding

IEC 60204-1: 2005 Safety of machinery – Electrical equipment of machines

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.