LEED 2012 adds Materials and Resources (MR) credit category

The U.S. Green Building Council's updates will reflect thousands of comments received during the LEED comment period.

09/16/2011


The U.S. Green Building Council’s (USGBC) next update to the LEED green building program, coined LEED 2012, will include updates to the Materials + Resources (MR) credit category. The updates reflect thousands of write-in comments received through the first LEED public comment period and include changes to existing LEED credit categories as well as two new credit categories, Integrated Process (IP) and Performance (PF).

LEED 2012 was in the second public comment period, which ended Sept. 14, 2011. Public comment periods are part of the continuous development process of the LEED program.

The Materials + Resources (MR) credit category, which addresses waste reduction while improving the environmental impact of materials selection and waste disposal, has been revised to include an increased focus on the application of Life Cycle Assessment (LCA). LCA is a powerful analytical technique used to assess environmental impacts associated with all the stages of a product’s life, from extraction, manufacture, use, reuse and disposal.

“By encouraging the use of LCA in LEED we’re encouraging project teams to use analytical tools that are based on information about resource flows through our environmental as well as economic systems. Our expectation is that project teams will make more informed decisions as a result” said Brendan Owens, Vice President of LEED Technical Development, USGBC. “While LCA has limitations, it does a number of things very well and it is one of the best ways conduct trade-off analysis to guide decisions about the specification of products.”

In addition to LCA, USGBC has added new MR credits that encourage project teams to specify materials that have been sourced responsibly as well as products screened to assess the impacts the product might have on human health on both a local and global level.

To encourage increased transparency of information about products, a new credit rewards the use of materials for which Environmental Product Declarations (EPDs) have been made. This practice encourages product manufacturers to engage in disclosure activities that provide building product specifiers and procurement officials with consistent and complete information about their products. Increased transparency around product attributes enables more informed decisions about product specification.

“As a whole, it’s critical we move toward understanding the impacts our building materials have relative to extraction, manufacturing, use and disposal over a product’s lifetime. The goals we’ve set for LEED are achieved when we reward building designers and operators who specify the best performing products from an environmental impact standpoint,” Owens concluded. 

USGBC expects that utilization of MR credits around EPDs, responsible raw material sourcing and avoidance of chemicals of concern will be beneficial to manufacturers of building materials. Additionally, LEED credits that heavily incentivize the use of building products sourced and manufactured in close proximity to the project that already comply with a variety of best practices and regulations will allow their products to stand out regionally as well as globally.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me