LED light fixtures

Kickflip LED fixtures from Alumen 8A are made of recycled aluminum and are supported at both ends by rigid, rectangular cantilevered arms attached to the luminaire.

12/11/2012


Kickflip LED fixtures from Alumen 8A are made of recycled aluminum and are supported at both ends by rigid, rectangular cantilevered arms attached to the luminaire. Courtesy: Alumen 8AKickflip LED light fixtures from Alumen 8A are designed for use in building lobbies, corridors, stairwells, and atriums. Kickflip uses a curved slender housing with an extruded clear acrylic lens and several slide-in options. The housing is made of 60% recycled aluminum and is 100% post-use recyclable. It is supported at both ends by rigid, rectangular cantilevered arms attached to the luminaire via connectors. The housing adjusts 180 deg to create direct or indirect upward or downward illumination. LEDs are shielded by the captive, impact-resistant extruded clear lens. The LED boards are replaceable and have built in foot-long increments up to 8 ft per unit. 

Alumen 8A

www.alumen8a.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me