Lab testing standards for dampers approved

ANSI and AMCA have approved "ANSI/AMCA Standard 500-D-2012, “Laboratory Methods of Testing Dampers for Rating."

04/20/2012


Air Movement and Control Association International Inc. (AMCA International) has announced that the Board of Standards Review of the American National Standards Institute (ANSI) approved the following document: "ANSI/AMCA Standard 500-D-2012, “Laboratory Methods of Testing Dampers for Rating."

This ANSI/AMCA Standard establishes uniform laboratory test methods for dampers.  Characteristics determined by this standard include air leakage, pressure drop, dynamic closure, operational torque, and thermal efficiency. Tests that are conducted in accordance with the requirements of this standard are intended to demonstrate the design, production or field testing of a damper and are not intended to determine or establish minimum or maximum performance ratings to be used for specifying these products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me