Injection mixing system

Taco's LOFlo injection mixing system

08/31/2011


Taco’s LOFlo injection mixing system enhances the energy efficiency of chilled beam systems. When compared to traditional HVAC systems, radiant cooling and chilled beams reduce fan electrical energy demand and consumption up to 10 times. The challenge has been that pump energy demand doubles. Taco’s LOFlo injection mixing system solves this problem because its mixing block consists of a variable speed injection circulator and constant-speed zone circulator. The LOFlo system reduces the electrical energy demand of an all-air system by up to 40%. It also accomplishes chilled beam BTU transport with only one-third of the energy needed by chilled beam systems without injection mixing.

www.taco-hvac.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.