Hospitals discover lowering HVAC costs saves energy

Healthcare facilities that implement energy conservation measures outperform their competitors by as much as 10% in net operating income, accord to EPA research.

01/05/2011


A hospital can be a stressful place — not just for patients who come for treatment, but for administrators faced with increasing HVAC costs and decreasing budgets. Energy use, in particular, is a large expense; indeed, healthcare-related research from the U.S. Environmental Protection Agency’s Energy Star program shows that energy consumption per square foot in hospitals is far higher than in many other type of building. Little wonder when you consider hospitals 24/7 operation and demanding requirements for air filtration. Risk of infection, after all, must be kept to a minimum, which means carefully filtering dangerous particles from the air.

But EPA research also shows that healthcare facilities that implement energy conservation measures outperform their competitors by as much as 10% in net operating income. Saving energy isn’t just good for the environment — it’s good for the bottom line.

Yet how do hospitals get there? How do they achieve better energy efficiency and see lower HVAC costs without sacrificing performance? Answering that question is particularly important when it comes to hospital air filtration, as only superior-quality systems can meet the requirements for patient care. Healthcare facilities depend on High Efficiency Particulate Air filtration (HEPA) — achieving a 99.7% efficiency — to prevent the spread of disease. But these air filtration systems can have great energy demands. And the strict indoor air quality required by operating rooms, emergency rooms, intensive care units, and laboratories — typically requiring 20 to 30 air changes per hour — stress budgets even further.

The answer lies in a single word: sustainability. Air filtration systems that are designed to work more efficiently, and use less energy, can do the job hospitals need at far reduced cost. Consider, for example, Camfil Farr clean air solutions — designed from the ground up with sustainability and energy efficiency in mind. Hospitals using Camfil Farr air filters are already seeing their HVAC costs drop by 15 to 30 percent. The filters use innovative technology to provide peak performance throughout their lifecycle — in stark contrast to traditional hospital air filters which degrade in efficiency over time. Camfil Farr filters need to be replaced less often — so disposal, maintenance, and replacement costs are also reduced along with energy expenses. For any healthcare facility, these are savings that quickly add up.

One of the challenges for hospitals embracing sustainability is to see how the new designs, products, and systems can pay off down the road. So Camfil Farr has introduced several tools to help healthcare facilities calculate these savings. Its Life Cycle Cost (LCC) software projects the precise cost of any air filtration system (Camfil Farr’s or a competitor’s) over the lifetime of that unit. It factors in real-world outdoor air characteristics, hours of operation, and costs for filters, labor, disposal, and energy. The software also takes into account installation issues, duct condition, and filter change outs. The LCC program lets hospitals see long-term expenses — which are a much more accurate benchmark for costs than initial price alone. Meanwhile, Camfil Farr’s mobile filter testing lab lets healthcare facilities test four combinations of filters simultaneously, under identical circumstances.

The results of these tests provide something decision-makers at healthcare facilities urgently need: an objective, scientifically valid comparison between products, making sure that hospitals make the purchase that works best for them today — and tomorrow to reduce HVAC costs.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.