Hall sensors for motors

11/04/2010


The entire range of 12- to 24-V Bosch dc electric motors with Hall sensors is available to developers of commercial, industrial, and medical applications that require precise control of motor speed or positioning mechanisms. When used with dc electric motors, Hall sensors can be used to detect the direction and speed of rotation, and position of the armature. By counting the generated output-voltage pulses, it becomes possible to determine the number of rotations, and therefore the speed, of the motor. Also, if the rotational motion is converted into a linear motion, it then becomes possible to monitor the range of travel exactly. If two Hall generators are installed offset to each other at a specific angle in a motor, then the direction of rotation can also be determined.

Bosch



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me