Ground fault protection circuit breakers

Eaton Corp. has expanded its circuit breaker capabilities to offer enhanced ground fault protection and nonfused current-limiting breaker modules for the Series G circuit breakers with the release of the Earth Leakage Modules and the current-limiting breaker modules.

01/19/2011


Eaton Corp. has expanded its circuit breaker capabilities to offer enhanced ground fault protection and nonfused current-limiting breaker modules for the Series G circuit breakers with the release of the Earth Leakage Modules and the current-limiting breaker modules. Equipped with a built-in sensor and ground fault relay, Eaton’s Earth Leakage Modules are designed to protect against equipment damage and increase personnel safety by limiting current. Additionally, the current-limiting breaker modules are designed to meet the increasing capacity of electrical source, providing increased fault currents. They provide advanced system protection during overloads and both low- and high-level short circuits.

Eaton’s current limiter module provides automatic reset after interruption, unlike fused current limiters with a one-time use. Eaton manufactures nonfused current limiting modules in combination with Series G E-Frame breakers with interrupting capacities up to 150 kA at 480 Vac.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me