Global market for packaged LEDs for lighting to nearly double in three years

LED technology is projected to grow 96% from 2013 to 2016 thanks to falling prices and increased mainstream use worldwide.

11/13/2013


Amid falling prices and rising consumer acceptance, light-emitting diode (LED) technology is taking over the lighting business, spurring a 96% increase in packaged LED revenue in the market from 2013 through 2016.

Global revenue for packaged LEDs used in lighting applications is set to soar to $7.1 billion in 2016, up from $3.6 billion in 2013, according to a new report entitled “Packaged LEDs – World – 2013” from IHS Inc. (NYSE: IHS).

The figure below presents the IHS forecast of revenue for packaged LEDs in lighting. A packaged LED is an LED die with a protective covering with contacts that enable it to be directly soldered to an electrical circuit.

“As retail prices for LED lamps have fallen, it’s become more obvious that they are an attractive alternative to conventional light bulbs, providing long-term savings in energy and replacement costs,” said Stewart Shinkwin, market analyst, lighting and LEDs, for IHS. “Because of this, shipments of LED lamps for lighting are set to increase dramatically in the coming years, rising to 2.4 billion units in 2016, up from 520 million in 2013. The rapid expansion of the lighting market will come as a major boon to suppliers of packaged LEDs, which are seeking the next growth opportunity following the slowdown of the backlighting business.”

LED technology is projected to grow 96 percent from 2013 to 2016 thanks to falling prices and increased mainstream use worldwide. Courtesy: IHS

Looking back at backlighting

In the past, rapid growth in the packaged LED market was driven by LCD display backlighting in applications such as mobile phones, notebooks and TVs. The majority of these applications have completed their transition to LED technology. Therefore, while LED demand for these products remains stable, annual unit growth largely is limited to single-digit percentages.

The lighting market, however, is predicted to provide the next wave of explosive growth for packaged LEDs. 

Let there be lighting

In 2012, the lighting sector became the largest end application for the packaged LED market, having finally overtaken the TV backlighting market. Market saturation for LED backlighting has resulted in a number of leading suppliers shifting their focus and development resources toward the lighting industry.

With LED lamp retail prices decreasing and more consumers realizing the cost savings LED lamps can provide over long periods of time, penetration of LEDs into the lighting market is set to increase significantly.

Light fight

Along with great opportunity, the projected growth in LED lamps will result in intensified competition among suppliers vying to capture market share.

This competition will continue to further drive down prices. IHS forecasts average selling prices for packaged LEDs in lighting to fall to $0.19 in 2018, down from $0.25 in 2016 and $0.41 in 2013.

The price erosion, in turn, will reduce the consumer payback period for LEDs, helping to increase adoption. However, declining profit margins will be undesirable for suppliers.

LED lamp penetration is already significant in a number of lighting applications such as the retail and hospitality sectors. However, it is the residential sector that IHS forecasts will provide the largest opportunity for packaged LEDs.

Packaged LED revenue in the residential sector is forecast to grow to nearly $2.7 billion in 2016, up from an estimated $850 million in 2013. Manufacturers that carve out share early on in this market could garner significant returns as the market booms.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.