Gallium nitride power semiconductor market to exceed $1 billion by 2021

The emerging market for Gallium Nitride (GaN) power semiconductors is forecast to grow from almost zero in 2011 to over $1 billion in 2021, according to a new report from IMS Research.

03/13/2012


IMS Research - Excellence in marketing intelligenceThe emerging market for Gallium Nitride (GaN) power semiconductors is forecast to grow from almost zero in 2011 to over $1 billion in 2021, according to a new report from IMS Research. The research firm analyzed all of the key end markets for the products found that power supplies, PV inverters and industrial motor drives would be the three main drivers of growth.

While Silicon Carbide (SiC) power devices have been around for some years, GaN power semiconductors have only just appeared in the market. One of the key reasons for the promising outlook for GaN power devices is because GaN is a wide bandgap material which offers similar performance benefits to SiC but has greater cost reduction potential. “This is possible because GaN power devices will be grown on a larger, lower-cost Silicon substrate”, stated Richard Eden, Senior Market Analyst and author of The World Market for Silicon Carbide and Gallium Nitride Power Semiconductors. “The key market driver is the speed at which GaN-on-Si devices can achieve price parity with Silicon MOSFETs, IGBTs or rectifiers with equivalent performance.”

The speed of GaN transistor developments has accelerated in the last two years, possibly due to a realization that the market will be potentially huge. The launch of International Rectifier’s “GaNpowIR” and EPC’s “eGaN FET” devices started the low voltage market in 2010. The emergence of Transphorm and its 600V GaN transistors in 2011 created considerable interest in the prospects of GaN competing with high voltage MOSFETs and IGBTs. Six of the world’s top ten discrete power semiconductor suppliers are planning to launch GaN power devices in the near future, and some may already be making devices for in-house end equipment.

The report utilizes IMS Research’s extensive market research on technology markets to drill down into applications ranging from consumer electronics to industrial equipment and renewable energy. The first applications to adopt will be power supplies where the total system cost savings outweigh the unit price penalty of the device. These include PC and notebook adaptors, servers, etc., and domestic appliances like room air-conditioners, where efficiency improvements are being driven by Government initiatives or regulations. Once reliability and other potential problems are resolved, PV microinverters, electric vehicle battery charging and other new applications are likely to adopt GaN power devices in the future.

However, the market report found that there are some barriers to main-stream market acceptance of GaN power devices. The first is availability, as few GaN transistors are available in mass production. Competing manufacturers’ products are non-standard and there are no second-sources. Second, the technology lacks maturity so far. Overall device performance and GaN material defect rates need improvement. A third issue is design inertia; the need to educate customers about both the potential benefits of GaN and how to use the devices.

The latest findings and analysis on this important emerging market can be found in IMS Research’s recently released report “The World Market for Silicon Carbide and Gallium Nitride Power Semiconductors - 2012 edition.”



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.