Fiber optic connectors

The FastCAM pre-polished fiber optics connectors from Leviton test for fiber continuity and are compatible with a visual fault locator. The device allows termination on 250 mm, 900 mm, 2 mm, and 3 mm fiber optic cable. The pocket-sized device assists in diagnosing optical fiber damage by using a bright red laser to locate faults, including tight bends, breaks, and defective connectors.

03/01/2010


 

 

 

The FastCAM pre-polished fiber optics connectors from Leviton test for fiber continuity and are compatible with a visual fault locator. The device allows termination on 250 mm, 900 mm, 2 mm, and 3 mm fiber optic cable. The pocket-sized device assists in diagnosing optical fiber damage by using a bright red laser to locate faults, including tight bends, breaks, and defective connectors. The tool includes a 2.5-mm ferrule interface, 1.25-mm adapter, and a soft carrying case.

 

Leviton Network Solutions Circle 456

 

 

 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me