Fan efficiency standard approved

ANSI and AMCA approved Standard 205, which defines fan efficiency grades (FEG), an energy efficiency classification for fans.

06/01/2012


The Air Movement and Control Association International, Inc. (AMCA International), announced that the Board of Standards Review of the American National Standards Institute (ANSI) approved the document about ANSI/AMCA Standard 205.

ANSI/AMCA Standard 205 defines fan efficiency grades (FEG), an energy efficiency classification for fans. The scope includes fans having an impeller diameter of 125 mm (5 in) or greater, operating with a shaft power 750 W (1 hp) and above, and having a total efficiency calculated according to one of the following fan test standards: ANSI/AMCA 210, ANSI/AMCA 230, AMCA 260, or ISO 5801. All other fans are excluded. The standard only applies to the fan, not the fan drive or the fan system.

This standard may be used by legislative or regulatory bodies for defining the energy efficiency requirements of fans used in specific applications. AMCA 205 is referenced in the 2012 International Green Construction Code and is under consideration for ANSI/ASHRAE/IES 90.1.

Learn more about the standard here.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me