Fan assist module

The PowerAire Quad fan assist module by Tate manages cooling requirements for dense server racks and blades.

10/05/2012


The PowerAire Quad fan assist module by Tate manages cooling requirements for dense server racks and blades. Courtesy: Tate Inc.Tate’s PowerAire Quad fan assist module uses four fans connected in parallel to provide built-in redundancy. The PowerAire Quad effectively manages the cooling requirements for dense server racks and blades. It provides a blast of cooling through the DirectAire airflow panel. PowerAire Quad is 4 in. deep, making it ideal for retrofit situations with finished floor heights as low as 7.5 in. Equipped with variable-speed fan drives, all four fans can be throttled up or down based on heat-load requirements. This makes PowerAire Quad an ideal solution for cooling the toughest hot spots in a data center. PowerAire is easy to install in retrofit applications or as part of a new, advanced cooling strategy. PowerAire Quad also features zero maintenance, high precision, and quick response temperature measurement, and viewable peak temperature for walkthrough check of each rack.

Tate Inc.

www.tateinc.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me