EGSA elects officers and directors for 2010

EGSA has announced the election of officers and three new board members for 2010. “The association would like to thank those leaving its Board of Directors and express its appreciation for their valuable contributions and continuous support,” said Jalane Kellough, EGSA Executive Director.

11/01/2009


        EGSA has announced the election of officers and three new board members for 2010.

         

        “The association would like to thank those leaving its Board of Directors and express its appreciation for their valuable contributions and continuous support,” said Jalane Kellough, EGSA Executive Director. “At the same time, EGSA would also like to welcome those newly elected to the board and thank them for taking an active role in the association.”

         

        EGSA officers for 2010 are:

         

        • President: Ron Hartzel, Eaton Corp., Moon Township, Pa.

        • President-Elect: John Kelly Jr., Kelly Generator & Equipment Inc., Owings, Md.

        • Vice President: Michael Pope, Süd-Chemie Inc., Needham, Mass.

        • Secretary-Treasurer: Debra Laurents, Cummins Power Generation, Minneapolis

        • Immediate Past President: Greg Linton, JRS Custom Fabrication, Ocala, Fla.

        Also elected to the Board of Directors were:

         

        • Brad Fennell, Chillicothe Metal, Chillicothe, Ill.

        • Ronald Schroeder, ASCO Power Technologies, Florham Park, N.J.

        • Mark Steele, Technology Research Corp., Clearwater, Fla.

        The newly elected officers will join the following directors who remain on the board through the coming year:

         

        • David Brown, Kohler Co., Kohler, Wis.

        • Joe Hafich, Emergency Systems Service Co., Quakertown, Pa.

        • Bobby McDonald, Generator Service Co. Inc., Hueytown, Ala.

        • Al Prosser, MTU Onsite Energy Corp., Mankato, Minn.

        • Greg Walters, Kim HotStart Co., Spokane, Wash.

        • Mike Witkowski, Pritchard Brown, Baltimore

        The newly elected officers and board members will be seated on the EGSA Board of Directors Jan. 1, 2010.

         



        No comments
        Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
        Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
        The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
        Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
        Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
        Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
        Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
        Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
        Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
        As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
        Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
        IEEE power industry experts bring their combined experience in the electrical power industry...
        Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.