Does a manual constitute an employment contract?

Bill Hadley, a young engineer in the plant engineering department hired six months ago, had his good points and bad. But, when Chief Engineer Charley Graham decided that the cons exceeded the pros, Graham decided to let him go.

01/01/1998


Bill Hadley, a young engineer in the plant engineering department hired six months ago, had his good points and bad. But, when Chief Engineer Charley Graham decided that the cons exceeded the pros, Graham decided to let him go. A hard-nosed professional, he wasn't one to pull punches.

The chief summoned Hadley to his desk and gave it to him straight. "It's not working out, Bill; I'm letting you go as of Friday."

Hadley was stunned. "Just like that?"

The chief shrugged. "There's no point in giving you a whole line of bull. It's just not working out. Let's leave it at that. We'll help you relocate any way that we can."

That didn't satisfy Hadley. "If you feel I'm not cutting the mustard, you have a right to fire me, but I think I deserve to know why."

"Not really. It's complicated. I don't want to go into it. If you take a look at your employment agreement, you'll see that it included an employment-at-will clause when you accepted the job. Under that clause, no explanation is required."

Hadley didn't dispute the clause but pointed out that subsequent to his employment, the company published a policy manual which specified a progression of verbal and written warnings before an employee could be discharged.

"The manual invalidates the employment-at-will clause," Hadley claimed.

Graham disagreed, but promised to check into it.

Question: Is Hadley correct in his contention that the manual nullifies the employment-at-will clause?

Marshall's verdict: Plant Engineer Art Marshall agreed with Hadley that the policy manual preempts his employment contract. He told Graham, "The manual, supplemented by a set of separate guidelines, constitutes a contract in itself that overrides Hadley's employment contract. Not only must he be told why he is being fired, the company must be able to produce evidence that supports the reasons given."





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.