Cutting fluids

Rustlick biostable semi-synthetic cutting fluids enable manufacturing plants to consolidate to one universal fluid. They are available in a non-chlorinated version – Ultracut 370R - or a chlorinated version – Ultracut 375R. The versatility of the fluids allow them to be used for both machining and grinding operation while providing optimum performance for a wide range of ferrous and...

01/01/1970


Rustlick biostable semi-synthetic cutting fluids enable manufacturing plants to consolidate to one universal fluid. They are available in a non-chlorinated version %%MDASSML%% Ultracut 370R - or a chlorinated version %%MDASSML%% Ultracut 375R. The versatility of the fluids allow them to be used for both machining and grinding operation while providing optimum performance for a wide range of ferrous and non-ferrous metals. Its high level of rust protection makes it also ideal for cast iron. The Ultracut 370R and 375R offer high lubricity and rust protection, good corrosion protection, lubrication, and tolerance to contamination with exceptional biostability and longer sump life than soluble oil cutting fluids.

ITW ROCOL North America

www.rocolnorthamerica.com





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me