Controller communications modules help OEM connections

GE Intelligent Platforms announced three new PACSystems RX3i modules aim to make communication more reliable and leverage performance.

01/15/2014


GE Intelligent Platforms announced three new PACSystems RX3i modules that provide infrastructure to OEMs and systems integrators with communication protocols as “in rack” solutions. The PACSystems family of automation controllers is standardized on the Profinet industrial network.

GE's PACSystems RX3i modules aim to provide infrastructure to OEMs and systems integrators. Image courtesy: GEThe Ethernet modules align with the industry trend of regarding the adoption of Ethernet-based communications and work in environments where downtime is not an option. They enable a connection at the device level to the software level of infrastructure organizations using object-oriented programming for greater access to actionable data.

The three new modules include the IEC61850, DNP3, and IEC60870-5-104 Ethernet-based communication protocols. These models aim to improve a company's access to data and the time-stamping of events through object-oriented programming. Time-stamping allows users to troubleshoot and identify the root cause of downtime and/or system disturbances, and eliminate them. The new modules also enable two-way communication between the SCADA and Intelligent Electrical Device levels. By uniting the control and software layers under a common architecture, information stored in the controller becomes more accessible and actionable.

GE

http://www.ge.com/

- Edited by Jessica DuBois-Maahs, Associate Content Manager, CFE Media, Plant Engineering, Control Engineering



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me