Control Engineering webcast, the Complex Simplicity of Ethernet, offers application advice

Advice for using Ethernet in industrial environments will be among knowledge shared in a Control Engineering webcast, the Complex Simplicity of Ethernet. Advice includes use of Ethernet in industrial applications, when redundancy is needed, streaming SCADA video for gauge verification; and Ethernet safety.

10/11/2010


NOW AVAILABLE on demand using the link below: Advice for using Ethernet in industrial environments will be among knowledge shared in a Control Engineering webcast, the Complex Simplicity of Ethernet.

The Thursday, Oct. 19, 2010, at 2 p.m. ET/1 p.m. CT/11 a.m. PT also will be available for viewing in the Control Engineering webcast archive. Register for the live event or view the archived information at www.controleng.com/webcasts.

Ethernet application advice includes the following:

  • Ethernet can make industrial networks better and easier to use;
  • Some applications will benefit from a redundant Ethernet architecture;
  • SCADA Ethernet applications can stream video to verify why an alarm is going off, confirming gauge readings;
  • Harsh-duty Ethernet hardware can add reliability in rugged environments; and
  • Ethernet use can benefit safety applications.

The Control Engineering webcast is sponsored by Molex and Moxa.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me