Construction activity improves in Q1

FMI's newest Nonresidential Construction Index (NRCI) increased 7.8 points to 58.1, indicating the construction industry is slowly improving along with the rest of the economy.

02/24/2012


FMI has announced the release of its Nonresidential Construction Index (NRCI) report for the first quarter of 2012.

The NRCI gained 7.8 points over last quarter to 58.1 this quarter. This positive move to start the new year is not exactly the sign of a bull market for construction, but continuing confirmation that panelists believe that the construction activity is following the lead of the slowly improving economy. There are good signs in hiring plans for 2012, as well as construction-put-in-place predictions. However, panelists indicate that low project pricing and high competition are still driving the market place.

  • Hiring: A five percentage points increase over this time last year, 42%of panelists indicated a 0% to 5% increase in full-time direct employees. Additionally, fewer panelists indicated a reduction in salaried employees.
  • Construction Put In Place: Expectations for CPIP are positive but cautious, as 41.3% of panelists expect growth of 0.5% to 2.5% for 2012.
  • Overall Economy: The component for the overall economy showed the strongest improvement of all index components with a jump from 43.6 last quarter to 68.7 in the first quarter, a 25 point gain. This score reflects the improvement in many economic indicators including the unemployment rate.
  • Nonresidential Building Construction Market Where Panelists Do Business: At just 54.9, the local markets for nonresidential construction are inching ahead. However, panelist responses reflect a perception that their own business is performing a bit better than the overall nonresidential construction market. This indicates that local markets are still very competitive.
  • Cost of Materials: Despite a slow economy, material costs continue to rise, with no panelists indicating material costs were lower than last quarter. The cost of materials component moved down nearly 5 points to 26.2. This factor is continuing drag on the overall index and is likely to raise the cost of projects while lowering profit margins for contractors.
  • Cost of Labor: The cost of labor improved just slightly to 41.5, indicating little change over the score of 40.0 last quarter. However, no panelists indicated they were experiencing lower labor costs.
  • Productivity: Contractors are continuing to make moderate gains in productivity. However, at 52.9, this component is still too weak to offset rising costs for labor and materials.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me