Commercial segment set to lead solar energy storage market by 2017

The commercial solar energy market is set to rise to 2.3 GW by 2017 thanks to an increased desire to intelligently manage the use of PV energy in an attempt to reduce electricity cost.

09/27/2013


Currently the smallest part of the global solar energy storage business, the commercial sector is projected to expand by a factor of 700 in the coming years and become the largest market segment in 2017. 

Global installations of photovoltaic (PV) storage systems for commercial use are set to rise to 2.3 gigawatts (GW) in 2017, up from a mere 3.2 megawatts (MW) in 2012, according to a new report entitled “The Role of Energy Storage in the PV Industry” from IHS Inc. (NYSE: IHS), a leading global source of critical information and insight. This will increase the commercial segment’s share of PV installations to 40% in 2017, up from 5% in 2012, as presented in the attached figure. 

The commercial solar energy market is set to rise to 2.3 GW by 2017 thanks to an increased desire to intelligently manage the use of PV energy in an attempt to reduce electricity cost. Courtesy: IHS

“Just last year, commercial was the smallest market for PV storage systems, far behind the residential and utility-scale segments,” said Abigail Ward, PV analyst at IHS. “However, facing rising energy prices and the growing need for backup power supplies, commercial enterprises are turning to PV storage solutions that work in concert with their solar-power systems. This will allow commercial to surge past residential and utility to become the largest market for PV storage in just four years.”

The commercial solar market consists of PV systems installed in businesses, including factories, offices, and other enterprises. 

Electricity rates drive demand

The major reason a commercial enterprise installs an energy storage solution is the desire to intelligently manage the use of PV energy to reduce electricity cost. 

“Utilities increasingly are imposing both peak demand charges and time-of-use fees on their commercial customers,” Ward noted. “These costs can be minimized by using a PV energy storage solution.”

An energy storage solution can be used to shift PV energy from when it is generated for on-site use during periods when these charges apply. 

“As a result, the amount of energy imported from the electricity grid during these times is reduced, and customers can attain huge savings on their electricity bills,” Ward observed. “These demand charges are being introduced to relieve pressure on limited electricity grids during times of high energy demand.” 

The backup plan

PV energy storage in commercial applications also can provide back-up power in regions where there are weak and unreliable grids. Electrical blackouts can have a tremendous impact on commercial operations, and often can result in significant financial losses. Rather than exporting PV energy to the electricity grid when generation exceeds on-site demand, the energy can be stored to be consumed during times when the electricity grid has failed, avoiding any disruptions. 

North America to take charge

Concerns about energy rates and grid reliability are prevalent in the North American commercial market. Consequently, North America is expected to lead the world in commercial PV storage, accounting for more than 40% of installations in 2017.

Storage in these applications will also be encouraged by the California Self-Generation Incentive Program (SGIP), which provides a financial subsidy against the upfront cost of an advanced energy storage system.  Installations likewise will be boosted by California Energy Storage Bill AB 2514, which includes targets for investor-owned utilities to procure by 2020 a given amount of energy storage in its electricity network, including individual targets for the customer markets.

Another lucrative region for commercial PV energy storage is Japan, where electrical blackouts are common following the Fukushima nuclear disaster. Also on a fast growth track is Germany, where self-consumption of PV energy is becoming increasingly financially attractive.

Supply-side constraints

The size of the commercial PV energy storage segment now is limited by the small number of suppliers and products serving the segment.

“At present, many of the suppliers active in the PV storage business are targeting the residential PV market, where systems are largely being installed to increase the on-site self-consumption of a PV system owner,” Ward said. “However, installations in the commercial PV sector potentially can reach the point of payback much more quickly than those in the residential area. This will encourage many PV storage suppliers to enter the business in the coming years.”



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.