Clean commissioning requirements

This seminar provides an example cleanroom, explains the different standards that can have an impact on cleanroom commissioning, and presents an outline for commissioning the example cleanroom.

07/23/2012


Many of the most complex and contamination-sensitive manufacturing processes require cleanrooms. Cleanrooms require more stringently controlled environmental conditions and have substantially more commissioning testing equipment than a typical office building. This seminar provides an example cleanroom, explains the different standards that can have an impact on cleanroom commissioning, and presents an outline for commissioning the example cleanroom.

> > Download the presentation

Vincent Sakraida, PE, LEED AP, Cleanroom Product Manager, Engineered AirPresenter: Vincent Sakraida, PE, LEED AP, Cleanroom Product Manager, Engineered Air

Sakraida is the Cleanroom Division Product Manager for Engineered Air. He has a bachelor's degree in mechanical engineering from the Georgia Institute of Technology.

During the past 30 years, Sakraida has participated in the engineering, construction, and commissioning of many high technology facilities, including: hospitals, pharmaceutical production, medical devices, R+D laboratories, electronics, and other manufacturing production facilities. He has over 25 years of experience in the design, construction, and commissioning of cleanroom facilities.

Sakraida was an ASHRAE Distinguished Lecturer from 2008 to 2010. He is an active corresponding member on the ASHRAE TC9.6 (Healthcare) and TC9.11 (Clean Space) committees. Sakraida has authored numerous articles for Engineered Systems and Heating Piping Air Conditioning magazines which included the article "Cleanroom Design in Ten Easy Steps." He is a member of the editorial advisory board for Engineered Systems magazine.

Sakraida is also a member of the Institute of Environmental Sciences and Technology, ASHRAE, the International Society of Pharmaceutical Engineering, and the American Society of Healthcare Engineers.

Presentation provided by the National Environmental Balancing Bureau (NEBB).


No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me