Ceiling-mounted spot cooler cools server room

The University of Louisville Health Care Outpatient Center, in Louisville, Ky., had a problem with its server room overheating. The center decided on a MovinCool CM12 ceiling-mounted spot air conditioner.

02/07/2011


The University of Louisville Health Care Outpatient Center, in Louisville, Ky., had a problem with its server room overheating. The 8 x 12-ft room houses server and telecom equipment that is vital to the center’s daily operations. The equipment runs 24 hours a day and needs to be cool at all times to avoid malfunctioning, hardware damage, or system downtime. University of Louisville Case Study

The problem surfaced when, in an energy-saving effort, the setpoints of the building’s central HVAC system were adjusted to turn the system off at night. As a result, equipment in the server room became excessively hot and was shutting down at night, incapacitating the health-care center for hours at a time.

The building’s facility manager knew that continuing to run the central air conditioning system to cool only one room would be too costly, so he contacted Joe Dotson, service account manager of Scarborough Mechanical Services, Inc., the Louisville firm that had installed the original HVAC system, to propose a solution.

In evaluating the available choices, Dotson excluded a precision cooling system as having unneeded features and an unnecessarily high price tag. “In this situation, it would have been overkill,” Dotson said. “A ductless split system was another alternative, but it would have meant additional installation expense in penetrating the roof and running refrigerant lines to the outside unit, as well as running electric lines to two separate pieces of equipment. Also, the room was very cramped, and there was really no space to mount a wall unit.”

DUniversity of Louisville Case Studyotson decided on a MovinCool CM12 ceiling-mounted spot air conditioner, which has a cooling capacity of 10,500 Btu/h at 80 F and 50% relative humidity (RH) at the evaporator and 95 F and 40% RH at the condenser; and 13,000 Btu/h at 95 F and 60% RH. The self-contained unit requires no external refrigerant lines, outside condensing unit, or charging of refrigerant, and it measures only 15.5 in. high, so it fits into the space above a drop ceiling. Built-in 10-in. flanges and mounting brackets allow quick installation with standard, off-the-shelf mounting hardware. The unit plugs into a 115-V electrical outlet, further reducing installation costs. Dotson purchased the CM12 from Trane HVAC Parts & Supplies, in Louisville.

“Installation was very straightforward,” Dotson added. “We got in and out in a day, with no system downtime and minimal impact on the customer. If the room had been unoccupied and we didn’t have to work above all the computer equipment, the installation would have probably taken only half a day.

“One convenient feature of the CM12 is that it has a built-in condensate pump, which eliminates an installation step or two. After attaching the unit to the ceiling and connecting the intake and exhaust ducts, we ran the condensate drain to a sink in a nearby maintenance closet.

“Then we installed the unit’s wall-mount thermostat. The CM12 can also be connected to a central control system, but there was no need in this scenario. A big advantage of a self-contained unit like the CM12 is that it’s in an interior space where the heat load is fairly consistent throughout the year, so we don’t have to worry about running an external condensing unit in low ambient conditions. We just set the thermostat to one temperature and hold it there all year round.”

Dotson and the team are very pleased with the results. “The health-care center has no more shutdowns due to overheating,” he said. “Also, the facility manager was happy that we were able to perform the installation so quickly and with no interruption of the center’s operations. He also likes the fact that without an outside condensing unit, the system has minimal maintenance costs.

“The CM12 is perfectly designed for this type of application. It has the usual MovinCool quality, it’s easy to install in tight spaces, and it has an affordable price tag.”


Information provided by MovinCool



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.