Bigger hospitals — bigger patient bills?

Deals involving hospital mergers doubled in 2012 compared to 2009 and this may have a significant impact on healthcare costs for consumers.

08/13/2013


Deals involving hospital mergers doubled in 2012 compared to 2009 and this may have a significant impact on healthcare costs for consumers. Courtesy: Cannon DesignIn yesterday’s  New York Times, there is an interesting article about the latest anticipated wave of big mergers among health systems. Much like the last go-around of mergers, this is in response to changes in policy in healthcare and government funding of those services. It’s a good, short read.

Here’s a powerful quote from the piece and a graphic that illustrates the wave of mergers.

"Whatever the outcome, hospitals are merging faster and in greater numbers than they have in years. After holding steady through much of the 2000s, the number of deals doubled to 105 in 2012 from 50 in 2009, according to Irving Levin Associates, a healthcare research firm. That is still less than half the annual peak during the last merger wave, in the late 1990s, but Booz and others say this is only the beginning."



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me