ACEC elects chairman

Gregs G. Thomopulos has been elected chairman of the American Council of Engineering Companies (ACEC).

06/24/2013


Gregs G. Thomopulos has been elected Chairman of the American Council of Engineering Companies (ACEC). Courtesy: ACECGregs G. Thomopulos, chairman of Stanley Consultants, has been elected chairman of the American Council of Engineering Companies (ACEC). Representing more than 5,000 firms, ACEC is a large federation of 51 state and regional councils representing America’s consulting engineering industry. Thomopulos served as ACEC chairman-elect in 2012-2013. He previously served as president of the International Federation of Consulting Engineers from 2009-2011.

Thomopulos is an ACEC Fellow and has long been an active member of the organization serving on a wide variety of national committees.

Thomopulos has 45 years of experience in the engineering and construction industry and is a licensed professional engineer in 14 states and Puerto Rico, a Fellow of the American Society of Civil Engineers, and a member of the National Society of Professional Engineers and the Society of American Military Engineers. He holds a BS in Civil Engineering from the University of Kansas, an MS in Structural Engineering and Structural Mechanics from the University of California, Berkeley and an honorary Doctor of Science from the University of Iowa.

Thomopulos joined Stanley Consultants in 1967, and served as president and CEO of the firm from 1987 until 2007 when he was elected chairman of the board. 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me