7 tips for an industrial Ethernet cyber security strategy

Industrial operations are becoming more aware of their vulnerability to cyber mischief or cyber attacks. Here are seven tips that can create the foundation for a cyber security strategy.



Industrial operations are becoming more aware of their vulnerability to cyber mischief or cyber attacks. Internet protocol (IP) strategy allows organizations access to more and better data and cost-effective remote monitoring and control of facilities, but it requires thought to avoid malicious or accidental security incidents. Here are seven tips that can create the foundation for a cyber security strategy. 

1) Physical:  Cyber security starts with physical security.  If outsiders cannot gain access to the premises, it is harder for them to access sensitive data. 

2) Firewalls:  Protect cyber assets with firewalls at the cyber perimeters of your critical cyber assets just as you protect the physical perimeter.

3) Port access control:  In addition to denying access to the building, disallowing unauthorized devices to be plugged into ports on switches and routers makes for a more secure environment.

4) Password health and authentication:  Change passwords regularly – and make sure that they are long enough and complex enough that they are difficult to crack.  Then consider adding authentication.  More secure than simple authorization (which ensures the person accessing the system is using the right code), authentication ensures that the person or device requesting access is who he/it says he/it is.

5) Encryption:  Fiber cabling is much more secure than copper when used to relay data between secure locations.  Sending encrypted data adds an extra level of protection outside secure facilities.

6) VPNs and VLANs:  Virtual Private Networks and Virtual LANS both provide extra layers of security for transmissions over multi-purpose transport networks.

7) Employee training:  Security is only as good as the practices that are in place.  Employees, without meaning to create a security breach, can be lax with passwords, security codes and other primary measures unless they are educated – and reminded – about the importance of security.

- Peter Wood is vice president of operations for GarrettCom Inc. www.garrettcom.com.

Also read, from Control Engineering:

10 Control System Security Threats;

Securing Legacy Control Systems; and

Cyber security for control systems: More tips, warnings from INL

- Edited by Mark T. Hoske, Control Engineering, www.controleng.com.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.