$4.7B savings for energy efficiency projects

Johnson Controls guaranteed that its more than 1,000 public-sector projects will save money on energy, water, and operational costs over the next 10 years.

03/10/2011


Johnson Controls disclosed its current public sector building efficiency projects in the United States are guaranteed to save more than $4.7 billion in reduced energy, water, and operational costs over the next 10 years. Additionally, it has already produced more than $19 billion in energy savings for both its public and private sector customers. Johnson Controls Building Efficiency business unit has more than 1,000 active projects in federal, state, and local government facilities across 50 states, including administration buildings, hospitals, universities, schools, airports, correctional facilities, and public housing.

Johnson Controls projects in the public and private sector have resulted in the reduction of more than 15 million metric tons of carbon dioxide or "greenhouse gas" emissions since 2000—roughly the same level of emissions generated from the energy use of 1.3 million homes in one year.

Public sector building improvement projects are typically funded through a performance contracting model which requires no upfront investment by the institution because the guaranteed energy savings offset the cost of facility improvements over time.

After the project has been completed, customers continue to benefit from ongoing energy and operational savings. On average, Johnson Controls' energy efficiency projects result in annual energy savings , 20 to 40%. Measures used to make buildings more "green" include the installation of high efficiency HVAC equipment and control systems, updated lighting systems, insulation, water efficiency measures and renewable energy solutions.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me