Consulting engineers who specify emergency power equipment understand that installations for...
Hospital Levels 2, 4, 5, and 6 being roughed-in; South Clinic Level 1 drywall installation; Parking... » more
This white paper explains how HVAC coil production has evolved and how the current technology can... » more
Roughing-in systems continues; drywall installations; West Clinic ceilings started » more
When developing data center energy-use estimations, engineers must account for all sources of...
An overhaul of the air handlers at a community college reaped energy savings and improved occupancy... » more
This police headquarters required an overhaul of its air handlers, building automation system, and... » more
The fan controls at an airport terminal had never been reviewed, and needed to be updated with... » more
When designing generator systems, consulting engineers must ensure that the generators and the...
Collaborative design is an emerging construction delivery process that applies multidisciplinary...
Use these four steps to ensure a successful expert-client relationship. » more
This exclusive research study provides information about the HVAC and building automation system...
The number of female engineers is low. As engineering professionals, we need to ensure we’re... » more
As more industries deem their daily operations to be mission critical, upgrading existing... » more
Any time the reliability demand is high and the data center has to work around pre-existing... » more
Knowledge is power when designing standby power systems. » more
The upgrade increased the system’s emergency power generating capacity, boosted its fuel storage... » more
Ground source water is one of the fastest growing applications of renewable energy in North... » more
Construction and fabrication are governed and controlled by the American Society of Mechanical... » more
The selection process is a trade-off between the overall heat transfer coefficient, which... » more
An existing building—destined as a medical facility—held a few surprises during renovation. BIM and... » more
This example shows how upgrades were made to a deficient HVAC system in a step-by-step process. » more
An example of an office that used energy modeling for HVAC load analysis and a lighting... » more
Glumac implemented daylighting control to achieve energy savings for their Portland headquarters. » more
Translating thoughts and ideas during a construction project can be challenging, and it is... » more